Home | Family
So, you've decided you want your own private hot tub in your garden and have bought and taken delivery of your very own hot tub. What do you do next? Well, first, it's vital to choose the outdoor location - work out if it's going to be put on an existing structure such as a deck, if you're going to build a new one, or if you're going to sink it into the ground. The tub needs to be on a solid surface, so make sure it's somewhere that's compatible with concrete.Once you've chosen your ideal location, you need to figure out where all the equipment is going to go - you'll need a decent amount of space available for the pump, piping, filter and heater, and these need to be located a safe distance away from your hot tub. Different tubs vary in their requirements, so check your instructions carefully to make sure you have enough room. Other things to consider include access to a gas line, plumbing and making sure your heater has enough clearance to avoid combustion.Next, make sure you thoroughly prepare your chosen location before you begin assembly as it will be hard to access once the hot tub is in place. You'll need to create concrete foundations for the hot tub and the equipment and, if you're using pre-existing decking, get an engineer to check the structural integrity of the wood to make sure it won't collapse. Also, if you're sinking the hot tub in the ground, make sure there's a 12 inch clearance all around at that it's not in contact with any soil.When your area is ready, you can assemble your tub. It sounds simple, but you basically need to work from the ground upwards. Start by putting in the support joists and suctions and make sure these are watertight by using a sealant such as silicon. This base is vital as it's what will keep your hot tub sturdy, so take care. Then build the tub upwards from the bottom. Use a light touch as too much force can affect the structure and make it leak.Congratulations - almost there. Once the external structure is complete, you can put the finishing touches to your hot tub. The main part of this is installing the bench so you have somewhere to sit. Take care to keep it level and ensure it doesn't damage the tub's structure. You can also sand down the top rim of the tub to make it smooth and prevent splinters. Once you're certain that everything is in place - enjoy! Remember you can always get a professional to check your work if you're unsure.
Article Source: http://www.articleparrot.com
Find Out More : Hot Tubs Derbyshire Or Hot Tubs Sheffield
Please Rate this Article
5 out of 54 out of 53 out of 52 out of 51 out of 5
Not yet Rated
